| Cables |
| Cables for C3D-Tow (Kevlar Deck Cable - Not for Towing) |
| The C3D-TOW system is delivered with a standard 75 meter Kevlar Deck Cable of 0.35” diameter, single coax, reinforced with abrasion resistant urethane jacket. The cable includes the dry side RF style connector to the CL-162 or CL-163 Transceiver and a Kevlar cable termination assembly for the wet side consisting of a Kellems grip and a molded female 4-pin micro, Subconn connector (MCIL-4F) with a locking sleeve. |
| 011060 |
Kevlar Deck Only coax cable w/termination 75 m (246 ft)
|
| ES Length |
Additional meter of Kevlar Deck Only cable
- per meter |
| |
| Cables for C3D-Tow (Armored Tow Cables) |
| 013295 |
Armored Tow coax cable 1.143 cm, (0.45 in) dia. w/termination TWC-290 - 200 m, (65.6 ft) |
| ES Length |
Additional meter of Armored coax cable
1.143 cm, (0.45 in) dia. - per meter
*Not to exceed 5000 m (16,404 ft) based on 5Mbits/sec data rate
**Recommend Rochester A301241 for application up to 5000 m (16,404 ft)
|
| C-250-218 |
TWC-290 Armored cable termination assembly for TTV-290 series |
| |
| Cables for C3D-LPM |
| B298-0485-10 |
C3D-LPM transducer cables - requires 2 but sold separately - 10 m, (32.8 ft) each |
| B298-0485-20 |
C3D-LPM transducer cables - requires 2 but sold separately - 20 m, (65.6 ft) each |
| |
| Cables for Chirp III (Kevlar Deck Cable - Not for Towing) |
| 011022 |
Kevlar deck only multi-conductor cable with terminations - 75 m, (246 ft) |
| ES Length |
Additional length of Kevlar multi-conductor cable – per meter |
| |
| Cables for Chirp III (Armored Tow Cables) |
| 013295 |
Armored Tow multi-conductor cable 1.27 cm, (0.50 in) diameter, 150 m (492 ft) length |
| ES Length |
Additional length of Armored multi-conductor cable 1.27 cm (0.50 in) diameter - per meter |
| 001567 |
Armored Termination for multi-conductor cable |
